Van Lấy Mẫu SH - hàng có sẵn

Van Lấy Mẫu SH - hàng có sẵn


Ball valves perform a quarter turn on/off or modulating function. A flow-controlling ball located within the body of the valve contains a hole through its center along one axis, which connects the inlet and outlet ports of the body. The ball itself is held in place by, and rotates 90º within, EPDM seats. These provide permanent lubrication and keep the valve bubble-tight. They are backed by elastomeric cushions, which provide pressure against the ball and, at the same time, compensate for wear. EPDM O-rings are used for stem and carrier seals to prevent leakage into the atmosphere. In the open position, the flow is straight through with minimal pressure drop, as long as the porting through the ball is the same size as the inside diameter of the pipe.





Pressure rated at 150 psi at 120º F (water)

Precise fingertip control

Calibrated flow indicator

Rugged uni-body construction, sturdy stem

90º turn operation with lever handle

Material: PVC, EPDM


Chemical Processing

Water & Wastewater Treatment


Thông số kỹ thuật


Sizes: 1/4", 3/8”

Bodies: PVC

Seats: EPDM

Seals: EPDM


Male Thread x Male Thread

Male Thread x Hose

Male Thread x Female Thread

Hose x Hose / Male Thread x Hose

Female Thread x Female Thread