Hệ Thống Thoát Thải Acid, Hóa Chất UPVC & CPVC (SPEARS)

Hệ Thống Thoát Thải Acid, Hóa Chất UPVC & CPVC (SPEARS)

Proven Solvent Cement Joining Eliminates Troublesome Fusion Equipment, Mechanical Joints & Elastomer Problems

NSF® Certified for Corrosive Waste Use & Listed to ASTM F 2618

Specification For CPVC Pipe & Fittings for Chemical Waste Drainage Systems

Meets IAPMO IGC 210 and ICC-ES PMG-1018 For CPVC Chemical Waste Systems

ABS Type Approved, U.S. Patent No. 7,178,557


-Complete System of Pipe, Fittings & Adapters

-Meets 25/50 Flame & Smoke Requirement for use in Return Air Plenums

-Non-Pressure Drainage Service to 220º F

-All CPVC Construction in a Full Assortment of Standard DWV Patterns

-Accessories including Drains, Neutralization Tanks, and Dilution Traps

-Specially Formulated One-Step Solvent Cement Provides Chemical Resistance Equal to System Pipe & Fittings – Now in Special Yellow Color

Chemical & Corrosion Resistant CPVC

One of the key advantages of Spears® LabWaste™ CPVC System is its excellent resistance to a broad range of corrosive environments. CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and compares favorably to other plastics in these chemical environments.

General Chemical Resistance Overview:

Weak Acids        -           Excellent


Salts                             -            Excellent

Strong Acids      -           Excellent


Aliphatic Solutions      -            Good

Weak Bases        -           Excellent


Halogens                     -             Good-Fair

Strong Bases      -           Excellent


Strong Oxidants          -             Good-Fair

The LabWaste™ CPVC System has been developed for use in Academic, Research, and Institutional Laboratory chemical waste drainage applications. These plumbing systems are characterized by the routine disposal of a wide variety of hot and cold chemical wastes in accordance with prudent laboratory practices for drainage disposal.

Manufactured to ASTM F 2618 in Full Line of Drainage Pattern Fitting Configurations

Spears® broad line of LabWaste™ CPVC pipe & fittings are manufactured to ASTM F 2618 Specifications for CPVC Pipe & Fittings for Chemical Waste Drainage Systems and produced in ASTM D 3311 drainage patterns or to manufacturer ’s specifications. Standard configurations are available in nominal sizes of 1-1/2" through 24" with many specialty fittings and accessories, like dilution traps, (water dilution being critical in the prevention of exothermic chemical interactions within all plumbing systems)

NSF® Certified For Corrosive Waste

Spears® LabWasteTM Corrosive Water Drainage System of pipe, fittings, and cement is tested and certified for use in corrosive waste systems by NSF International to ASTM F 2618, tested to IAPMO IGC 210, Certified to the Uniform Plumbing Code, Certified to NSF ORD 1022 for use in Canada and ICC-ES listed to PMG-1018 for CPVC Chemical Waste Systems.

Cost Saving Solvent Weld Joining Eliminates the need for Electro-Fusion Joints and for Mechanical Joint Connections in Concealed Spaces

A proven joining method reliably used for over 50 years, Solvent Cement Welding requires no special tools, no costly fusion easy installation, repairs or alterations. Most importantly, solvent cement joints end problems typical of polypropylene system installation, such as mechanical connector pullout, maintaining mechanically sealed joints, leaks from fusion wire corrosion, and cumbersome fusion joining methods.  Saves time, saves cost, saves worry!

A Flame & Smoke Rated Piping System

Spears® LabWasteTM system components have been evaluated and Listed by Underwriters Laboratories of Canada (ULC®) as finished products for surface burning characteristics under CAN/ ULC S102.2 and tested to UL 723/ASTM E 84, for Surface Burning Characteristics of Building Materials (NFPA 255, ANSI/ UL 723 and UBC 8-1), and showed a flame spread of < 25 and a smoke developed index of < 50.

Industrial & Commercial Special Waste Applications

Spears® LabWaste™ CPVC products can be used in a very broad variety of dedicated waste applications with proper evaluation of waste medium and service conditions. DO NOT follow Chemical Resistance Tables recommendations in this manual for these applications.   For non-laboratory applications, refer to CPVC pressure system resistance data for appropriate chemical resistance guidelines.  Please contact Spears® Technical Services for additional information.

American Bureau of Shipping (ABS) Type Approval

Spears® LabWaste™ CPVC Corrosive Waste Drainage System pipe and fittings are ABS Type Approved for marine and offshore applications in nominal pipe sizes through 12”. Type Approval details and restrictions are specified in ABS Certificate # 10-HS539421-2-PDA available on the ABS website at www.eagle.org.

Applicable Conformance Standards & Certications

Spears® LabWaste™ CPVC Corrosive Waste Drainage System is a complete system of pipe, fittings and solvent cement independently (3rd party) tested, evaluated and certified by the following laboratories and agencies.  Each of these approvals is routinely monitored through an ongoing program of periodic inspection and testing by the certifying agency.

• ASTM F 2618 - Certified for corrosive waste and use by NSF International (NSF®-cw) in accordance with ASTM F 2618, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems.

• Uniform Plumbing Code - Certified for use in accordance with the Uniform Plumbing Code (UPC®) by NSF International as specified in IAPMO IGC 210, Interim Guide Criteria for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Limited Chemical Waste Drainage System. (NSF®-U.P.Code).

• International Plumbing Code - Spears® LabWaste™ CPVC system has been approved for use in accordance with the International Plumbing Code (IPC®) by the International Codes Council Evaluation Services (ICC-ES) in accordance with ICC-ES PMG Listing PMG-1018 for Spears®  LabWaste™ CPVC Corrosive Waste Drainage System (See ICC-ES PMG Listing PMG-1018 at www.icc-es-pmg.org).

System Integrity – Limited Lifetime Warranty

Spears® LabWaste™ products have been developed and designed to be used as a total system consisting of pipe, fittings, accessories, solvent cement and thread sealant. All Spears® LabWaste™ components must be used in order to ensure a sound piping system. Substitution of other products for Spears® LabWaste™ pipe, fittings, or solvent cement may be detrimental to system integrity and is not recommended. The Spears® Limited Lifetime Warranty (located at the end of the manual) does not cover problems occurring as the direct result of the use of products other than Spears® LabWaste™ system products, or products and materials not compatible with CPVC materials


Thông số kỹ thuật

LabWaste CPVC Tech