Van Bướm Spears UPVC & CPVC

Van Bướm Spears UPVC & CPVC

Butterfly valves are rotary valves in which a disc is rotated 90° to open or close the flow passage. In the full closed position, the disc seals against an elastomer seat. Flow control can be accomplished by varying the degree to which the disc is opened. Spears® Standard and True Lug type Butterfly Valves utilize a special offset disc and low contact seat designed. Spears® Wafer style Butterfly Valve incorporates a special low contact, disc-mounted seat and centered disc. These designs minimize operation torque and improve sealing capabilities over conventional rubber seated valves.


Spears® patented Butterfly Valve design departs from traditional liner-seat type valve to eliminate seat creep, reduce operating torque and provide positive seal-off. Ideally suited for flow control or throttling, this high-performance valve is offered with a full variety of options for greater application versatility in industrial and chemical processing applications. Available in IPS sizes 1-1/2" - 14" in Standard or 1-1/2" - 12" True Lug (factory installed lugs) style.

Special off-set Disc lifts quickly from seat to reduce wear and reduce operating torque.

Patented Limited Contact Seat design provides free travel - eliminates seat creep, extrusion and wear. Field replaceable without full valve disassembly.

Interlocking Body & Seat prevents wash-out or blow-out.

Buna-N, EPDM or FKM Seat & Seals

Fully Isolated Solid Type 316L Stainless Steel Stem

Reversible High Impact Polypropylene Lever Handle with 7-Position stops & Built-in Lockout (standard handle on 1-1/2" - 8" valves; not available on 10" & larger valves)

High Efficiency Gear Operator with Cast Aluminum Housing, Polypropylene Hand-wheel, and Built-in Position Indicator (available for all sizes; standard on 10" & larger valves)

Lug Insert Style valve has factory installed SS316 or zinc plated steel lug inserts.

Standard valve accepts field-installable Lug Inserts Set option

True Lug design has factory installed zinc plated or SS 316 lugs and is specially designed for connection to either side of valve.

Pressure Rated to 150 psi @ 73°F including Dead-End Service.

ANSI/ASME B16.5 Class 150 Bolt Pattern

Valves with EPDM Seals & Seats are NSF® Certified for Potable water use.

Optional Accessories:

PTFE Coated Stem

Stem Extension Kit

PTFE Seat Sleeve

Lever Handle Kit (standard on 1-1/2" - 8" valves)

Gear Operator Kit (standard on 10" & larger valves)

T-Handle Kit

Field Installable Lug Insert Sets (for Standard valve)

Speed Handle (for gear operated valves)

2" Square/T-Style Operator Nut (for gear operated valves)

Chain-wheel Operator Kit (for gear operated valves)

Positive Stem Stop (for gear operated valves)

Submersible Gear Operators

Thông số kỹ thuật

All thermoplastic valves shall be Butterfly type constructed from PVC Type I Cell Classification 12454 or CPVC Type IV Cell Classification 23447. All valve seats and O-rings shall be Buna-N, EPDM or FKM. Seat shall be a non-liner type interlocked to valve body. Bolt hole patterns shall conform to ANSI/ASME B16.5 Class 150. Disc shall be offset design with fully isolated Type 316L stainless steel stem and Type 316 stainless steel hardware. Lever operated valves shall be equipped with high impact polypropylene handle having built-in lockout capability. Gear operated valves shall be equipped with position indicator and high impact polypropylene hand-wheel. Valve bodies shall accept field installable lug inserts or shall be factory installed lug inserts, or be True Lug type. Lugs shall be stainless steel or zinc plated steel. Valves shall be pressure rated at 150 psi for water at 73°F through 12", as manufactured by Spears® Manufacturing Company.