Bơm thử áp hệ thống đường ống - REED (made in USA)

Bơm thử áp hệ thống đường ống - REED (made in USA)

REED Manual Hydrostatic Test Pump

 Hydrostatic Test Pump

Reed’s HTP300 and HTP1000 Hydrostatic Test Pumps are designed to test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings. The test pumps are portable and can be used to test modest irrigation lines. Pump operation requires the user to first fill the system that needs to be tested. Next, the user raises the system pressure by actuating the test pump handle. Finally, the user closes the pump’s ball valve at the desired pressure. The user determines leakage based on dropping pressure as indicated by the hydrostatic test pump’s pressure gauge. The pump has a relief valve that reduces the likelihood of over-pressuring the system. Hoses are sold separately.

FEATURES

Economical yet reliable.

Consider manual pumps for infrequent use. 

 

 

REED Electric Hydrostatic Test Pump

 Hydrostatic Electric Test Pump

Electric Hydrostatic Test Pumps are designed for pressure testing water systems such as water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings. The output pressure is easily adjusted by turning a knob and watching the attached gauge. A built-in bypass allows for automatic water recirculation once the set pressure is reached. The hose-to-pump connection features a quick disconnect with built-in check valve, which allows for convenient setup and portability. Durable pump has stainless steel piston and brass cylinder for long pump life. Replacement seal kits available to sustain pump efficiency.

FEATURES

Smooth running, quiet 3/4 HP motor available in 110V or 220V.

Includes a 15-foot (4.6m) high pressure hose for filling the system.

Available with or without protective cage. 

 

 

Drill-Powered Hydrostatic Test Pump

 Hydrostatic Drill-Powered Test Pump

Use of a cordless drill for power keeps weight off this hydrostatic test pump, making it lightweight and portable. Included high pressure hose allows for filling the system and features quick disconnect. This 15 foot hose allows the pump to be set in a convenient location instead of being held next to the worksite. DPHTP500 uses a 1/2” chuck on an electric or cordless drill 18V or higher, capable of 1500 RPM (drill not included). These pumps are designed for pressure testing both residential and commercial water systems.

FEATURES

Powered by a ½” electric or cordless 18V drill (not included).

Lightweight since the power source is separate.

No drop cord needed when used with a cordless drill. 

Thông số kỹ thuật

REED Manual Hydrostatic Test Pump

Catalog No.

Item Code

Capacity

Weight

lbs

kg

HTP300

08150

300 psi

8.6

3.9

HTP1000

08160

1000 psi

8.6

3.9

 

REED Electric Hydrostatic Test Pump

Catalog No.

Item Code

Power Source

Maximum Capacity

Weight

gal/min

l/min

psi

bar

lbs

kg

EHTP500

08170

110V, single phase 50/60 Hz

2

7

500

34

37.5

17.0

EHTP500E

08171

220V, single phase 50/60 Hz

2

7

500

34

37.5

17.0

EHTP500C

08175

110V, single phase 50/60 Hz

2

7

500

34

48.0

21.8

EHTP500CE

08176

220V, single phase 50/60 Hz

2

7

500

34

48.0

21.8

 

Drill-Powered Hydrostatic Test Pump

Catalog No.

Item Code

Power Source

Maximum Capacity

Weight

gal/min

l/min

psi

bar

lbs

kg

DPHTP500

08177

Drill-powered (drill not included)

1.3

4.5

500

34

8.5

3.9